|
|
|
|
Hardware & DIY product category
Part I
|
Six-In-One Pocket Screwdriver: The Six-In-One Pocket Screwdriver is the right tool for the job when it comes to unexpected fix-it projects. Its convenient size makes this “mini-toolbox” the perfect companion for your home or car. Easy to use, its four bits fit neatly inside the handle for an all-in-one driver.
Assembly is as easy one, two, three:
1.
Lift tab to open handle 2. Remove shaft and desired bit 3. Insert shaft and bit as shown
l Convenient size fits anywhere l Flat Head & Phillips l Complete with four different sized bits l Bits store neatly inside handle
|
|
(Clutch type: Ensure the drive releasing when depth setting reached.)
(Using popular 1/4” bits, and can be
used with power extension bar to drive
Instruction: 1. For best result, use with a 1/4” reversible drill. 2. To load bits. Push down nose cone to the end until ball bearing retract, then insert bit into the chamber securely. 3. To remove bits: by reverse procedure. 4. To adjust setting: push rear collar down and rotate to desire setting (1~8). The higher number, deeper the screw will be driven. 5. To load screws: push screw into nose cone and let bearing hold it, then start the drill. When screw has reached desired setting, the clutch will release it automatically.
|
|
T-12 Stubby Ratchet Cle A Rochet Chicharra Specification： 1. Drop-forged 2. Chrome plated
3.
Hardened 4. Tempered 5. Smooth handle 6. Forge 7. Chrome 8. Durcie 9. Trempee 10. Poignee douce
|
|
T-20_T-30 _T-40 Automatic Power Driver with 4 bits 1. Converts your drill into a perfect SUPER DRIVER 2. Without pre-drilling for: wood, plastic & metal
3.
High carbon steel
l NO1. bit recessed l NO2. bit recessed l Four hex goal drive bits 1/4 (T-30 and T-40) bit 5/16” (T-20) bit slotted.
|
|
The superior screwdriving system
System Includes: 1. AngleDriver 6 head attachment 2. Long extension 3. Durable handle with Built-in storage compartment 4. Stabilizer wing 5. 26 machine-tooled bits constructed of hardened tool steel (Assorrted Sizes-Allen, Robertson, Torx, Phillips, Slotted, Standard & Metric Nut Drivers, and 1/4” Socket Adapter for Even Greater Versatility) 6. Spill-resistant case.
Specification： 1. Ideal for small, hard-to-reach and awkward areas! 2. AngleDriver is perfect for awkward screw locations-makes any job easier and eliminates the possibility of scraping and bruising Knuckles. 3. AngleDriver is the tool to reach for when working on the car, boat or lawnmower. If works great for adjusting hidden screws in hard to reach places. 4. AngleDriver also comes with long and short extensions creating conventional screwdrivers for almost any use. This compact kit has everything needed for hundreds of applications!
|
|
T-50 Automatic Power Driver with 6 bits
1.
Converts your drill into a perfect SUPER DRIVER 2. Without pre-drilling for: wood, plastic & metal 3. High carbon steel l NO1. bit recessed l NO2. bit recessed Six hex goal drive bits 1/4 bit 5/16” bit slotted
|
|
T-60 Head stop combination wrenchs Specification： 1. Slim panel 2. Chrome vanadium 3. Heat treated 4. Chrome plated 5. Shiny mat finished Size: 8mm, 10mm, 12mm, 13mm, 14mm, 17mm
|
Part II
|
Contents of kit： Ø Include a spare cutter wheel Ø Forged yoke hardened screen bar Ø 12/14/15/1.2'
|
|
Contents of kit： Ø Forged yoke hardened screen bar Ø 12/15/16/1.2'
|
|
Contents of kit： Ø Forged yoke hardened screen bar Ø 18/19/20/1.5'
|
|
Contents of kit： Ø Include a spare cutter wheel Ø Forged yoke hardened screen bar Ø 10/18/19/1.8'
|
|
CT-005 Tubing &
Flaring Tool Set Contents of kit： Ø Forged yoke hardened screen bar Ø Include a spare cutter wheel Ø 8/22/23/2.2'
|
|
Key Features： Ø Include a spare cutter wheel Ø 12/72/18/19/1.9'
|
|
Ø Include a spare cutter wheel Ø 12/72/18/19/1.9'
|
|
Ø Include a spare cutter wheel Ø 12/72/19/20/1.9'
|
|
Key Features： Ø With reamer inside the knob Ø 24/144/16/17/1'
|
|
Key features： Ø These lever-type benders are versatile, accurate and easy-to-use. Each tool bends one size. Made of forged steel. Hard chrome finished. Ø 6/36/16/17/1.8'
|
|
Ø 6/24/14/15/1.8'
|
Part III
|
|
Part IIII
|
|
|
Company profile Yung Lien is able to offer buyers a single source for all of their standard and customized hand tools, screwdriver and spanner shipments. With over 20 years of manufacturing and export experiences, the company is able to deliver items at economical prices. We know that right pricing is the key to your satisfaction. There are many manufacturers and trading companies in the hardware industry and the way we edge out our competitors is by offering items at a more affordable rate than others.
Yung Lien offers a line of nearly hundred items that range from small gifts to traditional hardware with very good deliver times. Most of the hand tools target mass merchandisers, although many are used by professional craftsmen. A large production selection allows us to cater to a larger client base. This diversity also provides customers with new ideas for broadening their markets. Approximately 80% of all items are currently being shipped to the Europe, while other major buyers are located within United States and Japan. |
| Contact Details |
|
|
|
Telephone：+ 886-4-22116033 Facsimile：+ 886-4-22139873 Address：No. 21, Lane 125, Dasing St., East District, Taichung City 401, Taiwan (R.O.C.)
Contact：Ms. Michelle Hsieh E-mail：ling914.ling@msa.hinet.net E-mail：michelle_hsieh66@hotmail.com Website： www.somild.com/yunglien.htm
|
©Copyright Since 2007 Yung Lien Enterprise Pty Ltd. All Rights Reserved
YUNG LIEN ENTERPRISE PTY LTD
